UGREEN USB Audio Adapter Spec Breakdown: DAC Chips, Ports, and Compatibility

As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

UGREEN has established a significant presence in personal audio connectivity by engineering compact, hardware-level digital-to-analog converters (DACs) that bypass noisy internal computer sound cards. Whether bridging standard 3.5mm auxiliary jacks to legacy USB-A ports on desktop towers or integrating audio processing alongside high-speed power delivery on modern USB-C mobile devices, the brand focuses on accessible, driverless audio hardware. Their lineup caters to varied technical requirements, addressing differences in pinout standards, signal-to-noise ratios, and high-resolution decoding limits.

Across this six-model lineup, UGREEN differentiates its hardware by host interface (USB-A versus USB-C), audio jack configuration (dual TRS splitters versus unified TRRS ports), digital decoding ceilings ranging from 16-bit/48kHz up to 32-bit/384kHz, and the inclusion of up to 60W Power Delivery pass-through charging.

UGREEN USB Audio Adapters Compared

01UGREEN UGREEN USB Sound Card Adapter for Legacy Dual-Jack Headsets

Best for: Legacy PC dual-plug headsets

Pros

• Dedicated mic and headphone jacks
• Plug-and-play driverless setup
• Broad legacy OS support

Cons

• Limited to 16-bit/48kHz resolution
• Bulkier ABS plastic casing

The UGREEN UGREEN USB Sound Card Adapter, designated as model 30724, is an external audio solution built for computing setups that require dedicated ports for audio output and microphone input. Encased in a durable ABS plastic housing, this adapter features a male USB-A connector on one side and dual 3.5mm TRS female jacks on the other. It operates as an independent sound card capable of 16-bit/48kHz audio sampling with a 90 dB signal-to-noise ratio. The device requires no driver installation and is recognized immediately across legacy and modern platforms including Windows 11 through Windows 98SE, macOS, Linux, PS4, PS5, Google Chromebook, and Raspberry Pi systems.

This ugreen usb sound card adapter delivers clean stereo audio while eliminating electromagnetic interference often picked up by unshielded front-panel motherboard jacks. The listing also notes 5.1 surround sound channel configuration support through system audio routing. For users managing multi-device desktop environments, deploying this adapter alongside hardware like a ugreen usb 3.0 sharing switch allows seamless toggling of analog audio peripherals between two separate workstations without constantly unplugging cords.

This model is primarily suited for desktop PC and older gaming headset users whose gear terminates in separate headphone and microphone cables. Because it relies on split TRS female ports, users with single-plug 4-pole TRRS mobile headsets would need a secondary breakout cable. If your setup requires higher bit depths or a single unified port, the brand provides newer alternatives further down the line.

02UGREEN USB to 3.5mm Jack Audio for Modern 4-Pole Headsets

Best for: Desktop users wanting higher SNR

Pros

• 110 dB signal-to-noise ratio
• Advanced C-Media IC technology
• Up to 192 kHz sample rate

Cons

• Incompatible with car and TV ports
• No pass-through charging

Best for: Everyday USB-A laptop headsets

Pros

• 24-bit/96kHz high-resolution DAC
• Durable aluminum and nylon braided build
• Supports CTIA and OMTP standards

Cons

• 50-ohm headphone impedance limit
• No Apple inline controls

The UGREEN USB to 3.5mm Jack Audio, identified by model number 30757, transitions away from dual-port splitters in favor of a unified 3.5mm TRRS audio auxiliary interface. Built inside an aluminum alloy shell with a nylon-braided exterior tested for over 10,000 bends, this compact dongle routes both headphone listening and microphone communications through a single port. Under the hood, an advanced DAC chip upgrades sampling performance to 24-bit/96kHz with a 95 dB signal-to-noise ratio, outperforming entry-level 16-bit sound processors.

A technical advantage of this ugreen external sound card is its dual-standard auto-detection. It natively supports headsets wired to either CTIA or OMTP pinouts, making it broadly compatible with international audio gear. Plug-and-play operation is supported across Windows versions, Linux, macOS, PlayStation 5, PS4, and Switch 2. However, the listing explicitly notes that it does not support Apple headphone inline controls, and it is limited to standard headphones with an impedance rating under 50 ohms.

This adapter is engineered for users connecting contemporary wired gaming headsets or smartphone earbuds with integrated boom or inline microphones directly to a standard USB-A computer port. Gamers and office workers who require bidirectional voice communications on a standard laptop will find this a streamlined, durable solution over bulkier ABS plastic units.

03UGREEN USB to Audio Jack USB for Low-Noise Desktop Audio

The UGREEN USB to Audio Jack USB, carrying model number 80864, elevates the standard USB-A dongle design by incorporating an advanced C-Media integrated circuit. This specialized processor delivers an impressive 110 dB signal-to-noise ratio alongside a maximum sample rate listed up to 192 kHz (with standard high-resolution output at 24-bit/96kHz). Housed in an aluminum alloy chassis, it combines durability and electromagnetic shielding into a compact profile that prevents physical interference with neighboring USB slots.

Functioning as a 2-in-1 external sound card, the 3.5mm auxiliary female jack accepts 4-pole TRRS plugs for simultaneous stereo audio reproduction and microphone recording. Compatibility covers standard USB Audio-enabled systems, including Windows 11 down to Windows XP, Mac OS X, Linux, PS4, PS5, Nintendo Switch dock, and Raspberry Pi boards. The manufacturer explicitly notes that this ugreen usb to aux adapter is not designed for car audio ports or television USB interfaces, which lack the required USB audio host drivers.

This adapter is ideal for audio enthusiasts, podcasters, and streamers seeking the lowest possible noise floor from a USB-A port without stepping up to a mains-powered external interface. Its 110 dB SNR provides superior dynamic headroom compared to the 90 dB and 95 dB models, making it the premier USB-A pick in the lineup for sensitive in-ear monitors.

04UGREEN USB C to 3.5mm Audio for Streamlined Mobile Listening

Best for: Mobile gaming with simultaneous charging

Pros

• 60W PD fast charging
• 24-bit/96kHz audio resolution
• Reinforced aluminum and TPE construction

Cons

• Incompatible with Samsung PPS protocol
• Not compatible with Amazon Fire Max

Best for: Minimalist USB-C mobile listening

Pros

• Lightweight 9-gram aluminum build
• 24-bit/96kHz DAC resolution
• Full inline volume and call controls

Cons

• Lacks charging pass-through
• Single 3.5mm TRRS port only

Designed for the expanding ecosystem of jack-free mobile hardware, the UGREEN USB C to 3.5mm Audio adapter is a minimalist dongle built to convert digital Type-C audio signals into an analog auxiliary output. Weighing just 9 grams and measuring 4.72 inches in length, the adapter features a metallic grey aluminum alloy connector casing paired with a robust nylon braided cable. It incorporates a hardware DAC capable of decoding up to 24-bit/96kHz high-resolution audio files while maintaining integrated noise reduction.

This ugreen usb c to 3.5mm audio dongle supports both listening and bidirectional voice calls. It fully supports inline remote controls on compatible 3.5mm earphones, allowing users to adjust volume, pause tracks, and answer incoming phone calls on the fly. Compatibility extends across modern smartphones, tablets, and laptops, including flagship Samsung Galaxy devices, recent iPhone models, and Type-C ultrabooks. When routing mobile accessories in tight environments, pairing your mobile setup with ergonomic cabling such as a ugreen 90 degree usb c cable can further optimize your overall desk or handheld ergonomics.

This compact adapter suits commuter setups, mobile professionals, and everyday smartphone users who want a durable, travel-friendly dongle to run wired earbuds. Because it lacks a secondary power port, it is meant strictly for users who prioritize minimal carry weight over the ability to charge during playback.

05UGREEN Magnetic 2 in 1 USB for Audiophile Lossless and Fast Charging

Best for: Audiophile mobile listening while charging

Pros

• Audiophile 32-bit/384kHz DAC chip
• 60W PD fast charging with PPS
• Durable magnetic cable design

Cons

• Slightly heavier 30-gram footprint
• Requires manual device format configuration

The UGREEN Magnetic 2 in 1 USB represents the high-performance tier of UGREEN’s USB-C audio category, merging high-resolution conversion with simultaneous power delivery. Built with an aluminum alloy enclosure and braided nylon cabling, it features a unique magnetic cable design that provides strain relief and reduces the likelihood of physical cable tearing during daily transport. The adapter splits the host USB-C connection into a 3.5mm headphone jack and a dedicated USB-C power input port.

Internally, this adapter is powered by an audiophile-grade DAC chip supporting resolutions up to 32-bit/384kHz, representing the highest decoding ceiling in this ugreen usb audio adapter comparison. On the charging side, an onboard power negotiation controller manages up to 60W Power Delivery. It supports multiple rapid charging standards, including USB PD, Qualcomm Quick Charge, AFC, and PPS, allowing devices like modern Galaxy flagships and Google Pixel devices to draw appropriate fast-charging currents while playing high-resolution audio.

This unit is specifically tailored for mobile audiophiles and high-fidelity streaming enthusiasts who use demanding media players on their phones or tablets. If you listen to 24-bit or 32-bit lossless streams while traveling and cannot afford battery depletion, this adapter provides the necessary DAC bandwidth and charging protocol compatibility.

06UGREEN USB C to 3.5mm Audio for Mobile Gaming and Voice Chat

The UGREEN USB C to 3.5mm Audio adapter (model 60164A) offers an alternative 2-in-1 design intended for heavy communications, gaming, and car audio use. Constructed with an aluminum connector and a high-density TPE cord, this unit provides a 3.5mm TRRS port alongside a 60W USB-C charging input. Its integrated DAC delivers crisp 24-bit/96kHz digital conversion with active noise suppression to prevent audio dropouts during long listening sessions.

Model 60164A is engineered specifically for voice chat stability across gaming platforms like the Steam Deck, Switch 2, and mobile devices during intensive gaming sessions. The 3.5mm input requires a standard TRRS male connection to capture microphone feeds. For charging, it supports PD 3.0 and QC 3.0 protocols up to 60W. However, the listing notes two crucial hardware exclusions: it does not support Samsung PPS fast-charging profiles (such as 25W and 45W PPS), and it is not compatible with Amazon Fire Max tablets.

This adapter is best suited for mobile gamers, remote workers, and road warriors who need reliable simultaneous audio and power on Steam Deck, iPad, or standard USB-C laptops. If your device strictly requires PPS charging at maximum speeds, the magnetic 32-bit adapter above remains the better choice, but for standard PD 3.0 gaming rigs, this model offers robust performance.

How to Choose the Right UGREEN USB Audio Adapter

Selecting which ugreen usb audio adapter to buy requires analyzing three primary hardware specifications: the host port type, the wiring standard of your existing analog gear, and your charging requirements. Because UGREEN produces models tailored for distinct use cases, identifying your device environment prevents audio ground loops or hardware incompatibilities.

First, verify your host machine’s physical connection. Desktop towers and traditional laptops benefit most from the USB-A models: the 30724, 30757, or 80864. If your setup revolves around modern ultrabooks, tablets, or smartphones lacking an auxiliary port, you must select one of the USB-C dongles. When configuring ultraportable workstations that utilize multifunction hubs like anker ethernet to usb c adapters, ensure your device has sufficient bus lanes or open ports to run a dedicated external DAC without signal dropouts.

Second, inspect your 3.5mm audio jack wiring. If you are using a legacy PC headset with two separate 3.5mm plugs (one green for headphones, one pink for a microphone), the dual-TRS UGREEN 30724 is the only adapter in this lineup that accommodates your hardware without an external splitter. If your headset utilizes a unified 4-pole TRRS connector, any of the other five models will support stereo audio and microphone input simultaneously, with the UGREEN 30757 offering explicit support for both CTIA and OMTP wiring schemes.

Third, evaluate DAC processing limits and signal-to-noise ratio. Casual gaming and voice conferencing perform well on standard 16-bit/48kHz or 24-bit/96kHz DACs. However, critical listeners who want absolute black backgrounds and minimal hiss on sensitive monitors should aim for the 110 dB SNR found on the UGREEN 80864, or the studio-grade 32-bit/384kHz sampling ceiling offered by the Magnetic 2-in-1 model.

Finally, decide whether pass-through power is mandatory. Standalone dongles are light and draw minimal bus power, but mobile devices running battery-intensive tasks like gaming or satellite navigation will require simultaneous charging. If you need power pass-through, ensure your phone’s charging standard matches the adapter: choose the Magnetic 2-in-1 for PPS-dependent devices, or the 60164A for standard PD 3.0 and QC 3.0 systems.

FAQ

What is the difference between a TRS and a TRRS 3.5mm jack on these adapters?

A TRS (Tip-Ring-Sleeve) jack features three conductors and supports stereo audio output only, without microphone capabilities. The UGREEN 30724 utilizes two separate TRS ports to keep microphone and headphone signals on distinct lines. A TRRS (Tip-Ring-Ring-Sleeve) jack adds a fourth conductor, enabling stereo output and microphone input through a single 3.5mm plug, which is standard on modern mobile headsets.

Can I use these UGREEN USB audio adapters with gaming consoles?

Yes, several models in this lineup explicitly support gaming consoles. The USB-A models (30724, 30757, and 80864) list compatibility with PlayStation 5 and PlayStation 4 consoles, as well as the Nintendo Switch dock. The USB-C 60164A model specifically lists support for handheld gaming on the Steam Deck and Switch 2 while providing pass-through charging.

Why does the UGREEN 30757 list a 50-ohm headphone limit?

The UGREEN 30757 is an ultra-compact, bus-powered USB audio adapter designed without a dedicated high-voltage internal amplifier. Headsets with impedance ratings higher than 50 ohms require more driving voltage to reach adequate volume levels and dynamic range. Running high-impedance studio headphones on this adapter may result in lower output volume and compressed dynamics.

Does the UGREEN 32-bit/384kHz DAC adapter automatically output at its maximum resolution?

No, the adapter will only decode at 32-bit/384kHz if your host operating system and media player are configured to output that format, and if the source file itself contains that resolution. The listing notes that users must check that equipment settings are appropriately configured to take full advantage of the hardware’s 384kHz decoding capabilities.

Will these UGREEN adapters work in car USB ports or on smart TVs?

Generally, no. Most smart televisions and automotive USB ports are programmed strictly for mass-storage media playback (like flash drives) or basic phone charging, and they lack the USB Audio Class drivers necessary to recognize an external sound card. The listing for the UGREEN 80864 explicitly states that it does not work for TV or car USB ports.